Owners manual

328 | IAP Maintenance Aruba Instant 6.4.0.2-4.1 | User Guide
Figure 122 Converting an IAP to Campus AP
3. Select Campus APs managed by a Mobility Controller from the drop-down list.
4. Enter the hostname, Fully Qualified Domain Name (FQDN), or the IP address of the controller in the Hostname
or IP Address of Mobility Controller text box. Contact your local administrator to obtain these details.
5. Ensure that the IAPs access the mobility controller IP Address.
6. Click Convert Now to complete the conversion.
Converting an IAP to Standalone Mode
This feature allows you to deploy an IAP as an autonomous AP, which is a separate entity from the existing Virtual
Controller cluster in the Layer 2 domain.
To convert an IAP to a standalone AP:
1. Click the Maintenance link in the Instant main window.
2. Click the Convert tab. The Convert tab is displayed.
Figure 123 Standalone AP Conversion
3. Select Standalone AP from the drop-down list.
4. Select the Access Point from the drop-down list.
5. Click Convert Now to complete the conversion. The an IAP now operates in the standalone mode.