Owners manual

Figure 121 Maintenance — Convert Tab
3. Select Remote APs managed by a Mobility Controller from the drop-down list.
4. Enter the hostname (fully qualified domain name) or the IP address of the controller in the Hostname or IP
Address of Mobility Controller text box. Contact your local network administrator to obtain the IP address.
Ensure that the mobility controller IP Address is reachable by the an IAPs.
5. Click Convert Now to complete the conversion. The IAP reboots and begins operating in the Remote AP mode.
6. After conversion, the IAP is managed by the mobility controller.
For IAPs to function as Remote APs, configure the IAP in the Remote AP whitelist and enable the FTP service on
the controller.
If the VPN setup fails and an error message is displayed, click OK, copy the error logs, and share them with your
local administrator.
Converting an IAP to a Campus AP
To convert an IAP to a Campus AP, do the following:
1. Click the Maintenance link in the Instant main window.
2. Click the Convert tab. The Convert tab is displayed.
Aruba Instant 6.4.0.2-4.1 | User Guide IAP Maintenance | 327