Owners manual

Upgrading to a New Version Manually
If the automatic image check feature is disabled, you can use obtain an image file from a local file system or from a
TFTPor HTTP URL. To manually check for a new firmware image version and obtain an image file:
1. Navigate to Maintenance>Firmware. The Firmware window is displayed.
2. Under Manual section, perform the following steps:
l Select the Image file option. This method is only available for single-class IAPs.
The following examples describe the image file format for different IAP models:
n For IAP-134/135 — ArubaInstant_Cassiopeia_6.4.0.2-4.1.0.0_xxxx
n For RAP-108/109, IAP-103, and IAP-114/115— ArubaInstant_Pegasus_6.4.0.2-4.1.0.0_xxxx
n For RAP-155/155P — ArubaInstant_Aries_6.4.0.2-4.1.0.0_xxxx
n For IAP-220 Series and IAP-270 Series — ArubaInstant_Centaurus_6.4.0.2-4.1.0.0_xxxx
n For all other IAPs —ArubaInstant_Orion_6.4.0.2-4.1.0.0_xxxx
l Select the Image URL option. Select this option to obtain an image file from a TFTP, FTP, or HTTP URL.
n HTTP - http://<IP-address>/<image-file>. For example, http://<IP-address>/ArubaInstant_Orion_6.4.0.2-
4.1.0.0_xxxx
n TFTP - tftp://<IP-address>/<image-file>. For example, tftp://<IP-address>/ArubaInstant_Orion_6.4.0.2-
4.1.0.0_xxxx
n FTP - ftp://<IP-address>/<image-file>. For example, ftp://<IP-address>/ArubaInstant_Orion_6.4.0.2-4.1.0.0_
xxxx
3. Clear the Reboot all APs after upgrade checkbox if required. The Reboot all APs after upgrade checkbox is
selected by default to allow the IAPs to reboot automatically after a successful upgrade. To reboot the IAP at a
later time, clear the Reboot all APs after upgrade checkbox.
4. Click Upgrade Now to upgrade the IAP to the newer version.
Upgrading an Image Using CLI
To upgrade an image using a HTTP, TFTP, or FTP URL:
(Instant AP)# upgrade-image <ftp/tftp/http-URL>
To upgrade an image without rebooting the IAP:
(Instant AP)# upgrade-image2-no-reboot <ftp/tftp/http-URL>
To view the upgrade information:
(Instant AP)# show upgrade info
Image Upgrade Progress
----------------------
Mac IP Address AP Class Status Image Info Error Detail
--- --------- -------- ------ ---------- ------------
d8:c7:c8:c4:42:98 10.17.101.1 Orion image-ok image file none
Auto reboot :enable
Use external URL :disable
Backing up and Restoring IAP Configuration Data
You can back up the IAP configuration data and restore the configuration when required.
Viewing Current Configuration
To view the current configuration on the IAP:
Aruba Instant 6.4.0.2-4.1 | User Guide IAP Maintenance | 323