Owners manual

267 | Services Aruba Instant 6.4.0.2-4.1 | User Guide
Figure 91 Services Window —ALE Integration
4. Specify the ALE server name or IP address.
5. Specify the reporting interval within the range of 6–60 seconds. The IAP sends messages to the ALE server at the
specified interval. The default interval is 30 seconds.
6. Click OK.
In the CLI
To enable IAP integration with the ALE server:
(Instant AP)(config)# ale-server <server-name| IP-address>
(Instant AP)(config)# ale-report-interval <seconds>
(Instant AP)(config)# end
(Instant AP)# commit apply
Verifying ALE Configuration on an IAP
To view the configuration details:
(Instant AP)# show ale config
To verify the configuration status
(Instant AP)# show ale status
Configuring OpenDNS Credentials
When configured, the OpenDNS credentials are used by Instant to access OpenDNS to provide enterprise-level
content filtering. You can configure OpenDNS credentials using the Instant UI or CLI.
In the Instant UI
To configure OpenDNS credentials:
1. Click More > Services > OpenDNS. The OpenDNS tab contents are displayed.
2. Enter the Username and Password to enable access to OpenDNS.
3. Click OK to apply the changes.