Owners manual
265 | Services Aruba Instant 6.4.0.2-4.1 | User Guide
2. Click the RTLS tab. The following figure shows the contents of the RTLS tab.
3. Under Aruba, select the RTLS check-box to integrate Instant with the AirWave Management Platform or Ekahau
Real Time Location Server.
Figure 90 RTLS Window
4. Specify the IP address and port to which the location reports must be sent.
5. Specify the shared secret key in the Passphrase text box.
6. Specify the frequency at which the Virtual Controller can send updates to the server. You can specify a value
within the range of 5-3600 seconds. The default value is 5 seconds.
7. Select the Include unassociated stations check-box to send reports on the stations that are not associated to
any IAP to the RTLSserver.
8. Click OK.
To configure third-party RTLS such as Aeroscout:
1. Select the Aeroscout check-box to send the RFID tag information to an AeroScout RTLS.
2. Specify the IP address and port number of the AeroScout server, to which location reports must be sent.
3. Select the Include unassociated stations check-box to send reports on the stations that are not associated to
any IAP to the Aeroscout RTLSserver.
4. Click OK.
In the CLI
To configure AirWave RTLS:
(Instant AP)(config)# airwave-rtls <IP-address> <port> <passphrase> <seconds> include-unassoc-
sta
(Instant AP)(config)# end
(Instant AP)# commit apply
To configure Aeroscout RTLS
(Instant AP)(config)# aeroscout-rtls <IP-address> <port> include-unassoc-sta
(Instant AP)(config)# end
(Instant AP)# commit apply