Manualshelf

Owners manual

ManualsBrandsARUBA NETWORKS ManualsComputers & LaptopsAruba Instant IAP-325 IEEE 802.11ac 1.69 Gbit/s Wireless Access Point - 2.40 GHz, 5 GHz - 8 x Antenna(s) - 8 x Internal Antenna(
141142143144145146147148149150
142 | Authentication and User Management Aruba Instant 6.4.0.2-4.1 | User Guide
Configuring Authentication Parameters for Management Users
Instant now allows you to configure a TACACS+Server as the authentication server to support authentication and
accounting privileges for management users. TACACS+ server allows a remote access server to communicate with
an authentication server to determine if the user has access to the network. In Instant, the users can create several
TACACS+ server profiles, out of which one or two of the servers can be specified to authenticate management
users.
TACACS+ supports the following types of authentication for management users in Instant:
l ASCII
l PAP
l CHAP
l ARAP
l MSCHAP
The TACACS+ server cannot be attributed to any SSID or wired profile in general as the authentication server and
is configured only for management users.
You can also enable TACACS+ accounting when the TACACS+ server is used for authentication.
Configuring a TACACS+Server Profile for Management User Authentication
To configure a TACACS+ authentication server:
In the Instant UI
1. Navigate to Security>Authentication Servers. The Security window is displayed.
2. To create a new server, click New. A window for configuring server details for the new server is displayed. The
following figure shows the parameters to configure for a new authentication server configuration:
Figure 42 New Authentication Server Window
To create a TACACS+ server profile, specify the attributes described in the following table: