User`s guide

28 Aruba RF Plan Part 0500030-01
v2.0.3 User’s Guide January 2004
RF Plan Tutorial
This section will guide you through the process of creating a building and populating it with
access points and air monitors using RF Plan.
You can use the RF Plan portion of RF Director or you can use the stand-alone Aruba RF
Plan product.
N
OTE—If you haven’t yet installed RF Plan, you should do so now. See “Installing RF Plan”
on page 2.
To Launch RF Plan, select Start > All Programs > Aruba Offline RF Plan > Aruba RF Plan.
Our Sample Building
We have filled in the planning table with the information we will use in this tutorial.
Building Dimensions
Height: 100 Width: 100
Number of Floors: 2
User Information
Number of Users: Users per AP: N/A
Radio Types: a, b, g
Overlap Factor: Medium (150%)
AP Desired Rates
802.11b|g: 48 Mbps 802.11a: 48 Mbps
AM Desired Rates
802.11b|g: 24 802.11a: 24
Don’t Care/Deploy Areas
Shipping & Receiving = Don’t Care
Lobby = Don’t Deploy