User`s guide

The Aruba RF Plan Tool 11
Dimensioning Your Building
Entering the correct values in the text boxes in the Dimension window.
z Width & Height Enter the rectangular exterior dimensions of the building.
The valid range for this field is any integer from 1 to a value corre-
sponding to .
If your building has an irregular shape, the width and height should
represent the maximum height and width of the overall footprint of
the building as seen from above,. For example:
When height and width are specified, RF Plan creates a rectangular
area in the Planning feature pages that represent the overall area
covered by the building. You will need to import an appropriate
background image (see “Floor Editor Page” on page 20.) to aid you
in defining areas that don’t require coverage or areas in which you do
not wish to deploy Access Points and Air Monitors (see “Ar ea E di t or
Page” on page 21).
z Inter-floor Height This is the distance between floor surfaces in the building.
The valid range for this field is any integer from 1 to a value corre-
sponding to .
N
OTE—This is not the distance from floor to ceiling. Some buildings
have a large space between the interior ceilings and the floor above.
z Floors Enter the number of floors in your building here.
The valid range for this field is any integer from 1 to a value corre-
sponding to .
z Units Specify the units of measurement for the dimensions you specified
on the page. The choices are feet and meters.
1
12
×10
Maximum Width
Maximum Height
1
12
×10
1
12
×10