User`s guide

The Aruba RF Plan Tool 25

1/22/04 Review Draft—CONFIDENTIAL

You specify these areas by placing them on top of the background image using the Area Editor.

Naming

You may name an area using an alpha-numeric string of characters with a maximum length of

64 characters. You should give areas some meaningful name so that they are easily identified.

Locating and Sizing

You may specify absolute coordinates for the lower left corner and upper right corner of the

box that represents the area you are defining. The datum for measurement is the lower left

corner of the rectangular display area that represents your building’s footprint. The coordi-

nates of the upper right-hand corner of the display area are the absolute (no unit of measure)

values of the dimensions you gave your building when you defined it with the dimension fea-

ture.

For example: If you defined your building to be 200 feet wide and 400 feet long, the coordi-

nates of the upper right-hand corner would be (199, 399).

OTE—Rember, the location is zero based, so the values range from 0 to (height-1 and

width-1).

You may also use the drag and drop feature of the Area Editor to drag your area to where you

want it and resize it by dragging one or more of the handles displayed in the corners of the

area.

Don’t Care areas are displayed as orange rectangles.