User`s guide

The Aruba RF Plan Tool 15
1/22/04 Review Draft—CONFIDENTIAL
Naming and Dimensioning Your Building
Navigate to the Dimension view by clicking on the Building Dimension button in the upper
right-hand corner of the page. Naming and dimensioning your building is as simple as enter-
ing the correct values in the text boxes in the Dimension window.
z Building ID This consists of two decimal numbers separated by a dot. The first
is the campus ID. The campus ID will always be “1” if there is only
one campus. The second is the building number.
The valid range for these fields is any integer from 1 to 255.
z Building Name Enter a user friendly name for the building.
The Building Name may be an alpha-numeric string up to 64 char-
acters in length.
z Width and Height Enter the rectangular exterior dimensions of the building.
The valid range for this field is any integer from 1 to a value corre-
sponding to .
z Inter-floor
Height
This is the distance between floor surfaces in the building.
The valid range for this field is any integer from 1 to a value corre-
sponding to .
N
OTE—This is NOT the distance from floor to ceiling. Some
buildings have a large space between the interior ceilings and
the floor above.
z Floors Enter the number of floors in your building here.
The valid range for this field is any integer from 1 to a value corre-
sponding to .
z Units Specify the units of measurement for the dimensions you specified
on the page. The choices are feet and meters.
1
12
×10
1
12
×10
1
12
×10