User`s guide

1/22/04 Review Draft—CONFIDENTIAL
2 Aruba RF Plan Part 0500030-01
v2.0.3 User’s Guide January 2004
About RF Plan
This section introduces the various features of RF Plan, the function of each feature, and the
information required by the feature. A detailed discussion of each feature is provided in
“Using RF Plan” on page 8.
System Requirements
Aruba RF Plan requires:
z Windows 2000 or Windows XP
z Microsoft Internet Explorer 6.0 or later
z Macromedia Flash 6.0 or later plug-in for Internet Explorer
z Intel Pentium® III 800Mhz (min) or equivalent
z 128MB RAM
z 10MB available hard drive space
Installing and Launching RF Plan
Installing RF Plan is simple, just follow the 3 steps below and you’ll be ready to use RF Plan in
no time at all.
N
OTE—RF Plan only runs on Windows 2000 and WindowsXP.
Locate the file named Aruba RF Plan.zip.
Unzip the file.
Launch setup.exe
The installer will automatically install the files in the C:\Program Files\Aruba RF
Plan directory.
Launch RF Plan.
Select: Start > All Programs > Aruba Offline RF Plan> Aruba RF Plan.
1
2
3
4