User Manual

Control functions

Before lighting the barbecue:

• Check that all the gas hoses and ﬁttings are tight.

• Open the thin or high cover.

NOTE: The thin cover is intended to protect against the weather. The cover is not intended to

be used as a cooking hood.

• Make sure that all the control knobs are in the closed (O) position.

• Make sure that the cooking surfaces are clean.

• Open the main gas valve.

OFF

MAX

MIN

then repeat the ignition procedure.

Ignition instructions

• Do not light the burners with the cooking surfaces covered.

• To light a burner, press the knob and turn it to the “MAX” (fast pre-heating) position.

• Hold it for 5 seconds (count to 10), release it and check the ﬂame from the

inspection slots

in the front (see page 35)

• If the burner is not lit, turn the knob to the closed (O) position. Allow the gas to disperse, and