User Manual
23
Rev.13052022
INSTALLATION INSTRUCTIONS AND WARNINGS (INDOOR USE ONLY)
ATTENTION
• If the barbecue is exposed to the weather we recommend the PVC cover is used. This is available as an optional extra;
product codes are BBQCOVER-F for the at lid. Available to purchase at www.artusi.com.au
• Recommended range hoods option extra
ARTUSI 120 cm BBQ canopy range hood, model ACH12BBQ
ARTUSI 120 cm wall mounted BBQ range hood, model ACH12BBQB
SELECTION OF THE POINT OF INSTALLATION
• The appliance must not be installed on non-combustible materials. The minimum distance from combustible materials is
1200mm overhead, 200mm sides and 200mm rear.
• The appliance must be installed in accordance with standards and local deviations.
• Ventilation must be ensured on both LPG & NG. Gas is highly explosive and can cause serious personal injury and property
damage if it is left to accumulate and then ignited. personal injury and property damage if it is left to accumulate and then ignited.
• The barbecue is designed to be mounted in a counter with a minimum depth of 600mm.
• Avoid locations exposed to the wind as this may affect cooking and the efciency of the burners. If you cannot avoid such a
location, screens may be necessary.
INSTALLATION COMPARTMENT
• The barbecue requires a non-combustible barrier beneath it to prevent reaching excessive temperatures. The panel that acts
as a barrier must be positioned 30/35 mm below the base of the unit.
• The installation compartment must be made of non-combustible materials. Materials suitable for its construction include
brick, granite, marble, Hardiplank® and Villaboard® on a metal or brick structure.
• The appliance requires ventilation openings in the front wall of the compartment. See the drawing on page 28 for the details.
• The appliance unit can be mounted in an island counter or a counter with splash guard. Read the specic requirements for
each type of mounting.
• When mounting the appliance against a wall, it is essential to insulate combustible materials. All combustible materials must
be kept at least 1200mm overhead, 200mm sides and 200mm rear away from the barbecue.
• The minimum depth of the mounting surface (counter) is 600 mm
• The required dimensions of the cut-out vary from model to model, please see dimension drawings for more information.
ISLAND-MOUNTED
• If the appliance is installed in an island, it can be placed in the centre. Pay particular attention to the overall dimensions of the
top of the island, taking into account the open lid and its projection. See page 26.
• The required dimensions of the cut-out vary from model to model, please see dimension drawings for more information.
NB: Use of engineered stone (e.g. Cesar stone) as a bench top is permitted providing temperatures upto 120°C are tolerated