Specifications

ARTURIA – SPARK EDM – QUICK START

3.8.2 Rescan the plug-in directory in Cubase

If the Spark EDM does not appear in the list of VST plug-ins, you can perform

a “rescan” of the plug-in directory.

3.8.3 Saving of presets

When the session/project is saved, Spark EDM is saved in its last mode of

operation, with all modifications intact. For instance, if you were working on a

“P1” preset in which you had modified parameters (without saving them as a

separate preset within the plug-in itself), the next time you open the project,

Spark EDM will load the “P1” preset plus the modifications you made

previously.

The drop-down menu in which the VST sequencer allows you to save a new

preset is of course usable with Wurlitzer V. However, it is highly advised to use

the Spark EDM internal menu: the presets saved in this way are usable in any

other mode (standalone or with other sequencers), they can be exported and

exchanged more easily, and they will remain compatible with the Spark EDM

future versions.

3.8.4 Multi Output Mode

Create an instrument using the VST Instrument Menu then click on Spark EDM,

then

select the output you want to enable by clicking on the button just on the left of the

instrument name in this menu.

3.8.5 Recording Midi out from Spark EDM into your VST host

Here’s an example of a VST Host configuration for recording Midi out from Spark EDM

using LIVE.

- Add Spark EDM VST plugin on a Live track.

- Add a Midi track for recording Midi from Spark EDM

- Configure the new Midi Track (left track on the image):

. Set ‘Midi From’ to ‘Spark EDM’ and change ‘Pre FX’ to ‘Spark EDM’ in the following

combo

. Set Monitor to ‘Auto’

. Arm the session recording