Specifications

ARTURIA – SPARK EDM – QUICK START
17
Click on the pad called Bass Drum at the bottom left side of the Center panel. You are
now playing bass drum. To record a Bass drum, click first on the record button and then
on the play button, the recording has now started.
Play your Bass drum part on the Bass Drum pad and then click stop. By clicking "Play",
you will now listen to the track you just recorded. To record another instrument, select
another instrument track (If you forgot how to do this, go back to 2.4.4 Select an
instrument) and repeat the same steps to start recording.
2.4.7 Change Instruments/Kits with the jog
To change an instrument with the Jog Dial, you need to first select the instrument you
want to change. Now, go to the Song/Pattern zone. Click above the Jog Dial where it
says: "Instrument". Click on the Jog Dial and while holding your click, move your mouse
up or down to select a new instrument. The name of the instrument will be displayed in
the Digital display window in the center of the main panel. Once your choice is made,
click on the Jog Dial to load the new instrument.
The procedure to change a Kit is the same, except that you do not need to select an
instrument since you're loading all of them. Just click below the Jog Dial where it says:
"Kit", and follow the same procedure as with the instrument selection.
Jog dial used in instrument mode includes a menu for selecting the instrument type and
the generator type. (See 5.2.4 Jog Dial section in the Spark Creative complete Manual
on Arturia website: http://www.arturia.com/manuals.html).