User manual

Copyright © Berghof Automationstechnik GmbH
Reproduction and duplication of this document and utilisation and communication of its content is
prohibited, unless with our express permission.
All rights reserved. Damages will be payable in case of infringement.
Disclaimer
The content of this publication was checked for compliance with the hardware and software described.
However, discrepancies may arise, therefore no liability is assumed regarding complete compliance.
The information in this document will be checked regularly and all necessary corrections will be included
in subsequent editions. Suggestions for improvements are always welcome.
Subject to technical changes.
Trademark
CANtrol
®
// is a registered trademark of Berghof Automationstechnik GmbH
General Information on this Manual
Content:
This manual describes the CANtrol module QAIO 16/4-V and QAIO 16/4-A and its modifications. The
product-related information contained herein was up to date at the time of publication of this manual.
Completeness:
This manual is complete only in conjunction with the user manual entitled
‘Introduction
to CANtrol Automation System’
and the product-related hardware or software user manuals required for the particular application.
Standards:
The CANtrol automation system, its components and its use are based on International Standard
IEC 61131 Parts 1 to 4 (EN 61131 Parts 1 to 3 and Supplementary Sheet 1).
Supplementary Sheet 1 of EN 61131 (IEC 61131-4) entitled ‘User Guidelines’ is of particular importance
for the user.
Order numbers:
Please see the relevant product overview in the ‘Introduction to CANtrol Automation System’ manual for
a list of available products and their order numbers.
Ident. No.: 2801720
You can reach us at our headquarters at:
Germany: Austria:
Berghof Automationstechnik GmbH Berghof Elektronik und
Harretstr. 1
Umwelttechnik GmbH Nfg KG
D-72800 Eningen A-6200 Wiesing 323
Phone: [phone] / 8 94-0 Phone: [phone] / 6 48 08 -0
Telefax: +49 (0) 71 21 / 89 41 00 Telefax: +43 (0) 52 44 / 6 48 08 -81
http://www.berghof-automation.de http://www.berghof.co.at
e-mail: [e-mail] e-mail: [e-mail]
The Berghof Automationstechnik GmbH works in accordance with DIN EN ISO 9001