User Manual

2. GETTING STARTED WITH MATRIXBRUTE
With the MatrixBrute on a solid playing surface, push the Panel Release latch and use the
hinged prop inside to set the control panel at the most convenient angle (or just leave it flat
if that works better). Take care when lifting on the Matrixbrute panel as it could cause the
support to fall.
In order to hear the instrument, connect cables from the Master Out to your amp and
speakers. Use the left output for mono, i.e. if you're only using one cable. (You can also just
use headphones - the jack is on the left side of the front edge, by the wheels.)

Register and update first: MatrixBrute is designed so it can work stand-alone, but it also brings some
very useful features to a computer environment.
Please use a USB-B to USB-A cable to connect it to a Mac or PC when you first get it.
Back View
Arturia - User Manual MatrixBrute - Getting Started with MatrixBrute 4