User Manual

Hook waits until you move a knob past its current setting to "catch" (hook) it before sending
anything. This is the default mode.
Scaled increases or decreases the actual setting regardless of where the knob is. So if the
actual value is 12 and you move the knob from 3 to 4, the actual value will go to 13. Scaled
allows you to increment or decrement the knob value. The drawback is if the knob is at a
high or low extreme, you obviously cannot move it further. In this case you need to turn the
knob and the value will have to go either negative or positive first.
Velocity curve - This lets you adjust the keyboard response to your playing style and
preference.
Linear (the default) has an even response across the dynamic range;
Log requires the least amount of force to play louder notes, but it's harder to control the
dynamics at lower levels;
Exponential is less jumpy at lower dynamic levels, but it takes more force to reach high
dynamic levels.
Sequencer/Arp Sends Notes - (On/Off) The sequencer/arpeggiator can send MIDI notes to
trigger other instruments or to be recorded in a DAW.
Enable 14-bit automation - (On/Off) Many of the knobs on the front panel can set to send
high resolution 14 bit MIDI data. Some DAWs may not receive this information correctly
however. In this case, you can turn off 14 bit automation.
Load sequence tempo - When set on never the tempo setting is global. Changing preset will
not update the tempo. If always is selected stored sequence tempo will always be loaded.
Aftertouch sensitivity - Let you adjust the keyboard aftertouch response. Default value is
20% if you need to reach max aftertouch value with less pressure increase this value.
AC Input Specifications
Voltage 100V - 240V AC
Power 45W
Frequency 50-60 Hz
Pedal Connections
Expression(x2) Tip = Pot center tap ; Ring = 3.3V ; Sleeve = Gnd
Sustain Normal open
Arturia - User Manual MatrixBrute - MIDI 50