User Manual

• < and > locate the transport backward or forward one step (when it's stopped)
and trigger the note on the step. (They have a different function in Arpeggiator
mode. See below.)
• Record - (Lights up red.) This works independently of whether the transport is
moving. When it's moving, your playing is recorded in real time, including Ties
and Accents. Turning the Mod knob will overwrite the Seq Mod track from the
first step where the knob was turned until the last step of the sequence. If Record
is pushed when the transport is stopped, press any of the 64 step buttons and
whatever note you play will be recorded on that step. The button turns pink to
indicate the current step. You can record over any note(s) in a sequence, and you
can turn off individual notes simply by pushing their buttons.
• Play from beginning - (Lights up white.) This works under any condition -
transport moving or stopped, Record active, etc.
• Play/stop/continue - (Lights up green.) This also works under any condition.
• "Auto-play" feature: When the Sequencer button is lit, the pattern will start to play,
and continue as long you hold a note on the keyboard. Play from beginning lights
up, and the pattern continues until you release the note. Play the note again, and
the pattern starts over from the beginning.

NOTE: The pattern auto-plays its programmed pitches if you play middle C, but it transposes if you
play another note (and if you play subsequent notes, it transposes again without stopping, provided you
connect the notes closely enough). For that reason, it's a good idea to program/record patterns with C
as the base note.
• Tempo, rate, and playback controls

NOTE: These apply to both Sequencer and Arpeggiator modes.
43 Arturia - User Manual MatrixBrute - The Matrix