User Manual

5.3.1.1. Step parameters:
The sequencer's 64 steps are in four 4-button rows of 16.
• Step indicates a trigger on that step (when it's lit red). See the Record button
below for instructions on how to program patterns, but you can push the button
to turn a programmed/recorded note off. To tie several steps together, hold the
first step button and press the last step one. All step buttons but the first are
dimmed (darker).
• Accent lights automatically when you enter or record a note at higher velocities,
or you can turn it on to create an accent. This is used in conjunction with the
VELOCITY sliders on the ENV 1 (VCF) and ENV 2 (VCA).
• Slide activate the GLIDE enable button and will allow you to slide from one note
to another.
• MOD toggles modulation on and off for the step. It has to be routed to a
parameter in the modulation Matrix to have an effect.
5.3.1.2. Sequencer transport and Pattern recording/programming
Arturia - User Manual MatrixBrute - The Matrix 42