User Manual

5.1. PRESET mode
5.1.1. Panel
Panel toggles between the physical and loaded preset positions.
When in this mode, the positions of the knobs determine the sound. This is the mode to use
if you are looking to get 1:1 feedback of parameters and the sound you are editing.

IMPORTANT: To hear a preset you've loaded, the Panel button must be off!
5.1.2. Recalling internal presets
To recall one of the 256 internal presets:
In PRESET mode, simply select its button. The banks are rows A - P on the left, and presets
within each bank are columns 1-16. To select, say, patch B3, go two rows down and three
columns across; B 03 will appear in the numeric display. Alternatively, use the < and >
buttons underneath the numeric display to scroll up and down through the presets.
5.1.3. Saving a preset
To save the Panel or edited Preset in an internal location:
Press Save + [desired bank/channel location], using the Matrix buttons or < and > buttons.
Arturia - User Manual MatrixBrute - The Matrix 36