User`s manual

ARTURIA – MiniLab – USER’S MANUAL 35
Once you’re sure where the preset will be stored, click the “Send to Keyboard” button:
That’s all there is to it! The preset you created has been safely stored to memory
location #2, and can be recalled by using the Shift button and Pad #2 together. See
section 5.1.8 below for details.
5.1.8 Recalling a Preset / Switching between Presets
Once you’ve created a couple of presets you can switch between your personalized
configurations very quickly. This is as simple as it can be: simply hold the Shift button
and press one of the pads.
In the picture above the combination of the Shift button and Pad 2 will select Preset #2
from the MiniLab preset memory locations.
To switch from Preset #2 to Preset #1, hold Shift again and press Pad 1 instead.
5.2 Changing the Global MIDI Channel
Switching between MIDI Channels is one very quick way to select which instrument
and/or track you are controlling in your DAW software. The combination of the Shift
button and one of the keys on the MiniLab keyboard is how this is done.
Notice that there are numbers in small blue boxes above each of the first sixteen keys
on the MiniLab keyboard. These correspond to the 16 possible MIDI channel numbers,