User`s manual

ARTURIA – MiniLab – USER’S MANUAL 11
2.2.5 Parameter control encoders
The sixteen encoders can be assigned to control any editable parameter on the selected
device. The assignments within each Analog Lab preset and within each synthesizer type
may vary according to the parameters that are available.
The Parameter control encoders
2.2.6 The pads / preset buttons
The eight large buttons arranged across the front of the MiniLab serve a dual purpose.
Their exact duties are determined by the state of the Shift and Pads buttons.
For example: The pads can be assigned to trigger up to sixteen particular MIDI notes
(drums, stabs, bass notes, whatever). When the Pads 1-8 / 9-16 button is not lit, the
first bank of pads are active (1-8). When the Pads 1-8 / 9-16 button is lit, the second
bank of pads are active (9-16).
However, when used in conjunction with the Shift button, the pads will recall one of
eight MIDI presets. This is accomplished by holding the Shift button and pressing one of
the pads.
The pads / preset buttons