User`s manual

ARTURIA – Analog Laboratory – USER’S MANUAL 61
5.5.8.4 Save sounds
The sounds provided with Analog Lab are ‘Factory’ thus cannot be modified. If you
modified the sounds of a ‘Factory’ Multi that you want to save, then you must create new
sounds. They will then be listed in Sound Mode.
To save the Sound of the Part 1, check the ‘Save Part 1 Sound As …” checkbox and edit
its new name. To save the Sound of the Part 2, check the ‘Save Part 2 Sound As …’ and
edit its name.
If the check boxes are unchecked, the ‘Factory’ Sounds will be used instead.
5.6.1 Start a Multi from Scratch
Sometimes building something from the ground up is the best way to learn how it works.
So if you’d like to start your own Multi, click the ‘New’ button in the tool bar:
Follow the twists and turns that you encounter as you experiment! What you end up with
will be uniquely suited to your curiosity.
Note: the ‘New’ button is only active in Multi mode.
5.6.2 MIDI control of Multi mode parameters
If there are particular controls on an external USB MIDI controller that you would like to
assign to one of the virtual controls inside Multi mode, that is entirely possible. Just click
the MIDI button in the tool bar and they’ll become another color, indicating that they are
waiting for you to make a selection.
Press Control on your computer keyboard and click on the virtual control you wish to link
to a particular control on your controller keyboard. A window similar to this one will open
(for a full description of its parameters, see section 0):