User Manual

ARTURIA – BRASS 2 – USER’S MANUAL
72
Connection of a MIDI track to BRASS 2
The events played on a MIDI keyboard are recorded by your host sequencer, and now
you can use the MIDI editing possibilities of the sequencer to control any parameter with
BRASS 2.
7.2.2.2 Saving of presets
When the session/project is saved, BRASS 2 is saved in its last mode of operation, with
all modifications intact. For instance, if you were working on a “P1” preset in which you
have modified parameters (without saving them as a separate voice in the plug-in itself),
at the next opening of the piece, BRASS 2 will load the “P1” preset and the modifications.
The drop-down menu which the VST sequencer allows you to save a new voice is of
course usable with BRASS 2. However, it is highly advised to use the BRASS 2 internal
menu: the presets saved in this way are usable in any other mode (standalone or other
sequencer), they can be exported and exchanged more easily, and they will remain
compatible with the future BRASS versions.
7.2.2.3 Automation
Automation works the same with BRASS 2 as with any VST plug-in (for more details
about automation, refer to the VST sequencer documentation).
7.3 Audio Unit (Max OSX only)
7.3.1 Installation
The Audio Unit plug-in is automatically installed in the folder reserved for this purpose,
in: /Library/Audio/Plug-Ins/Components/