User Manual

ARTURIA – BRASS 2 – USER’S MANUAL
60
 To quantize the beginning of the notes, click the option “Quantize start time”.
 To quantize the note length, click the option “Quantize duration”.
 The quantization will be applied when you select the option “Apply quantize” of
the menu.
 To reset note placement, select the option “No quantization”.
5.2.4.4 Editing the real time controls
The real time controls available in the live section (Attack, Pressure, Pitch, Tone, Noise,
Vibrato, Vibrato Frequency, and Mute) can be separately edited and saved for each
instrument in the riff.
To open the editing panel of the real time controls, select the button in the
middle of the Riff interface. This same button, once the panel is open, changes into a
button and allows you to come back to the riff explorer display.
The editing panel makes it possible to select one of the parameters, to activate its control
in the riff (“Activate” button) and to draw the controls with different tools. Those tools
are the same as those used for automation in live mode (See “5.1.1 Middle Part –
Controlling Parameters in real time” Automation of the live parameter).
Editing the real time parameter for an instrument in a riff
When a real time control is deactivated in the Riff interface, the parameter varies
according to the original sound preset, in the same way as the Live interface. This means
that the starting value and the original automation in the instrument preset are taken
into account. When the option “Activate” is selected, values drawn in the Riff interface of
the parameter replace the original instrument preset values.