User Manual

ARTURIA – BRASS 2 – USER’S MANUAL
36
Breath controller assigned to pressure and noise
As you may have noticed, the control of BRASS 2 in Live mode is very simple, but using
MIDI control in the Riff mode is very easy as well. You can set the parameters that will
trigger your riffs by simply playing a MIDI note (either on a MIDI keyboard or a host
sequencer):
 Go back into Riff mode, then choose the MIDI channel by clicking in the field
“MIDI Channel” from the MIDI SETUP page.
 When you want to synchronize the riff with the tempo of the MIDI host sequencer,
click on the option “Host Tempo” to activate such synchronization.
Choose the “Host Tempo” option
 When you want to change the “internal” tempo of BRASS 2, click on the “Fixed
Tempo” button, then choose the tempo by clicking in the tempo field.