User Manual

ARTURIA – BRASS 2 – USER’S MANUAL
27
MIDI PRESET page
 By default the page focuses on the selected slot’s midi configuration; in this case
the second saxophone
 You can add connections between MIDI control sources and instrument
parameters by clicking on the “+” button.
 For a connection you can choose:
• The MIDI modulation source (velocity, pitch bend, MIDI CCs...),
• The instrument’s parameter to be controlled using the MIDI control set above,
• The mapping curve for the controller’s values onto the parameter and,
• The previously set control’s gain.
Thus, the way the instruments respond to your playing can be tweaked very precisely !
 Connect, for example, the velocity to the attack, then the modulation wheel to
instrument pressure and vibrato.
Connect “modulation wheel” to the “pressure”entry