User Guide

ARTS PDF Aerialist User Guide
Productivity
3. Enter in the name and other details of the tool; select a button image, etc.
The bottom left-hand side of the dialog contains the list of commands
available. Scroll down the list until you reach the Link commands. Select the
desired function and click “Add”.
4. The selected function’s dialog will now appear. Enter the properties you wish
to set for the command and then click ‘OK’.
Note: Like Acrobat’s Batch Processing function, you cannot operate any other
functions whilst in the editing mode.
5. Once you have entered all the details required for your tool click ‘OK’. Your
new tool button will now appear in the customized toolbar. You can then run
the function by clicking on that button.
3.5.8. Using the Split command
To create a Split function toolbar button with the Productivity feature, follow these
steps:
1. In Acrobat, click the Add/Remove Tools button on the toolbar, or use the
menu system: ‘Plug-ins > ARTS PDF Aerialist > Productivity > toolbar name
> Add or Remove Tool’.
2. Click the “New” button. This will open up the Edit Tool Properties dialog.
3. Enter in the name and other details of the tool; select a button image, etc.
The bottom left-hand side of the dialog contains the list of commands
available. Scroll down the list to select the ‘Split’ command and click “Add”.
4. The selected function’s dialog will now appear. Enter the properties you wish
to set for the command and then click ‘OK’.
Note: Like Acrobat’s Batch Processing function, you cannot operate any other
functions whilst in the editing mode.
5. Once you have entered all the details required for your tool click ‘OK’. Your
new tool button will now appear in the toolbar. You can then run the function
by clicking on that button.
3.5.9. Using the Stamp command
To create a Stamp function toolbar button with the Productivity feature, follow these
steps:
1. In Acrobat, click the Add/Remove Tools button on the toolbar, or use the
menu system: ‘Plug-ins > ARTS PDF Aerialist > Productivity > toolbar name
> Add or Remove Tool’.
2. Click the “New” button. This will open up the Edit Tool Properties dialog.
| CONTENTS | INDEX |
 Page 32 of 155 