User's Manual

801162
_
INS
_
Mobile
Mini
Speaker
Instructions Doc. Size: 250mm W x 115mm H
Folded Size: 50mmW x 115mmH
Output at 100% Prints 1/1 Black Finishing: Trim to Crops; Accordian Fold: 4 folds
Fold
Fold
Fold
Fold
BATTERY PRECAUTION
Please dispose of this unit in the
same manner as you would an
exhausted battery.
FCC INFORMATION
This equipment has been tested
and found to comply with the
limits for a Class B Digital Device,
pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the distance between the
equipment and receiver.
• Connect the equipment to an outlet
on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
This equipment complies with Part 15
of the FCC Rules. Operation is
subject to the following two conditions:
1. This equipment may not cause
harmful interference.
2. This equipment must accept any
interference received, including
interference that may cause
undesired operation.
Modifications not authorized by the
manufacturer may void the user’s
authority to operate this device.
FCC Radiation Exposure
Statement
This equipment complies with FCC RF
radiation exposure limits set forth for
an uncontrolled environment. This
transmitter must not be co-located or
operating in conjunction with any other
antenna or transmitter.
Canada Statement:
This device complies with RSS-210 of
the IC Rules; Operation is subject to
the following two conditions: (1) this
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
CHARGING THE SPEAKER
1. Connect the USB Cable
(included) to the micro USB
Port on the speaker.
2. With the speaker’s On/Off Switch
off, plug the other end of the
USB Cable into a USB Port on
your computer.
3. The LED Indicator will illuminate
red while charging, and the light
will go out when the speaker
is fully charged. Charges in
approximately 2.5 hours for up to
11 hours of listening enjoyment.
LISTENING TO YOUR
AUDIO DEVICE (AUX MODE)
1. Connect 3.5mm audio cable to
Aux-in jack of the speaker. Plug
the other end of the cable into
an MP3, CD player or other
audio device directly.
2. Slide the On/Off Switch on
the side of the speaker to
on. The LED Indicator light
will illuminate blue.
3. Play your audio device as you
normally would, and adjust the
volume on your audio device and
with the Volume Rocker Button on
the speaker to enjoy your music
at the desired volume.
Mobile Mini BT Speaker
FOR TABLETS, LAPTOPS
OR SMARTPHONES
1
2345
6
7
4. For more bass, simply twist the
Bass-Boost Cap on the top of the
speaker counter-clockwise to
pop the bass-boost up!
5. To close the Bass-Boost Cap,
push it down and twist clockwise
until it sits securely on the base
of the speaker.
6. To disconnect the speaker
from the audio source, remove
the 3.5mm audio cable from your
audio device.
7. Slide the On/Off Switch on
the side of the speaker to
off. The LED Indicator light
will go out.
PAIRING TO YOUR DEVICE
1. Prepare your device to pair using
Bluetooth, making sure you are
within 33 feet of Mobile Mini BT
Speaker. Refer to your device’s
owner’s manual for details if
necessary.
2. Slide the On/Off Switch on the
speaker to on. The LED indicator
light will illuminate blue.
3. Press and hold the Pairing button
until the LED indicator light starts
flashing.
4. The Mobile Mini BT Speaker is in
pairing mode when the LED
LOCATION OF PARTS
AND CONTROLS
1. Bass-Boost Cap
2. Micro USB Port
3. AUX-In Port
4. Pairing Button
5. Volume Rocker Button
6. On/Off Switch
7. LED Indicator
8. Micro USB cable (not shown)
9. 3.5mm audio cable (not shown)
undesired operation.
Cet appareil est conforme à la norme
RSS-210 de la règlementation
d'Industrie Canada ; son utilisation
est soumise aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de
brouillage, et
(2) l'utilisateur de l'appareil doit
accepter tout brouillage
radioélectrique subi, même si le
brouillage est susceptible d'en
compromettre le fonctionnement.
IC Radiation Exposure
Statement
The device meets the exemption from
the routine evaluation limits in section
2.5 of RSS 102 and compliance with
RSS-102 RF exposure, users can
obtain Canadian information on RF
exposure and compliance.
Le dispositif rencontre l'exemption
des limites courantes d'évaluation
dans la section 2.5 de RSS 102 et la
conformité à l'exposition de RSS-102
rf, utilisateurs peut obtenir l'information
canadienne sur l'exposition et la
conformité de rf.
This Class B digital apparatus complies
with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme
à la norme NMB-003 du Canada