User's Manual

EN - 6

POWER

CONNECTION

Connecting

Power

Plug the Power Adaptor into the AC jack that

located on the rear of the product and plug the

other end into a standard AC socket.

CAUTION: The AC Adaptor has a polarized plug that fits into the wall outlet only one way.

If the plug does not fit properly, turn it over and try again. Do not force it.

NOTE: When the unit is intended for being unused for a long period of the time. Please turn off the unit and unplug the power

adaptor from the AC wall outlet.

Battery

Operation

Before installing batteries (not included), ensure that

the unit is disconnected from the mains supply.

Remove the battery compartment cover on the

bottom of the main unit AND the microphone

by a screw driver. The battery covers can then be

lifted away.

Fit 4 x 1.5V AA-size batteries (not included)

into the main unit AND 2 x 1.5V AAA-size batteries

into the microphone (not included).

Refer to the polarity markings inside the battery

compartment. Never mix old and new batteries.

Finally, replace the cover.

For battery operation, switch off the mains

supply and remove the AC power adaptor from

the power socket, battery operation will be

selected automatically.

1.5V

AAA/LR03

1.5V

AAA/LR03

1. 5V AAA /L R0 3

Caution:

There is a danger of explosion if batteries are replaced incorrectly.

Replace batteries with the same type and same brand only.

If the unit will not be used for a long period of time, turn OFF the unit and microphone and remove all

batteries from the main unit and microphone.