User's Manual

EN - 7

AUX INPUT

REAR VIEW OF TV OR VCR

OR HOME THEATER

1. Plug a microphone into the MIC1 or MIC 2 jack at the rear side of your karaoke machine.

Their output is mixed with playback from CD/CD+G.

2. Turn on your microphone to sing.

(Only one microphone

is included)

SETTING UP YOUR MICROPHONE

SELECTING YOUR KARAOKE MACHINE AS YOUR SOURCE/INPUT

Selecting your Karaoke Machine as a source / input on your TV is very similar to connect

a VCR/DVD or Satellite system.

We’ve listed below the most common ways of selecting the source from your TV or VCR /

Home Theater:

1. In the set up menu of the TV or VCR / Home theater there may be an option for “Input

Select” where you can choose between “Cable/Ant., Video 1, Video 2, etc” as the input

source.

2. Look for a TV channel between the highest and lowest on your TV or VCR / Home

theater (i.e AUX, EXT, LINE 1 or LINE IN)

3. Your remote control for your TV or VCR / Home Theater may have source input

selections as well as detailed below: “Video, Video 1, Game, AUX, EXT or LINE-IN.”

Choosing one of those sources in most cases should display the lyrics from your

Karaoke Machine as well.

AUDIO CONNECTION

Please follow the steps below to connect audio signal from the unit to your TV, VCR/Home

Theater or home audio system.

1. Locate the multi-colored RCA cables (White and Red)

2. Connect audio cables to the Audio Out of the back of your Karaoke Machine.

3. Connect the other end of the audio cables to the Audio/Auxiliary input on your TV or

VCR/Home Theater or home stereo system.

Warning:

Please do not point the microphone head directly to the front of the speaker(s) on the unit

when you are singing, it would cause unwanted feedback sound that may affect the

performance of your unit.

Tapping or dropping the microphone while it is on can permanently damage your

microphone. Do not swing the microphone around by the cord!