User's Manual

EN - 12
TROUBLE SHOOTING GUIDE
Mic volume control is set to
minimum.
Adjust mic volume to max, and
then re-adjust to a comfortable
level.
Turn on mic with the ON/OFF
switch located on the microphone.
Mic is off.
Using your TV Remote to select
VIDEO input or select the proper
VIDEO input on TV itself.
Connect from VIDEO OUT of the
system to the VIDEO IN on your
VCR or Home theater. (Refer to
“Making the Connections”). Check
the disc to be sure it is a CD+G.
PROBLEM POSSIBLE CAUSE SOLUTION
No sound - if audio is
going through TV, VCR
or Home theater.
No song lyrics appear
on the TV screen.
No sound from mic.
Source Selection on your TV,
VCR or Home theater is not
set properly.
Improper connection to
stereo system.
Video cable is not connected
properly to the TV.
Connect the video cable to the
Karaoke Machine’s VIDEO OUT
and to the TV VIDEO IN.
Source selector on TV is not
set to VIDEO.
TV does not have video line
input.
A CD+G disc is loaded but
the CDG indicator is not lit.
Check disc to be sure it is clean.
Select AUX IN as the source for
your TV, VRC or Home theater.
Follow direction on ‘Audio
connection’ page for connecting
to a home stereo system.
No sound when playing
audio via Bluetooth.
Your Bluetooth device does not
paired properly.
Pair your Bluetooth device
according to the "Bluetooth setup"
section.
The volume control of your
Bluetooth device is set at too
low.
Increase the volume of your
Bluetooth device.
The volume control of the unit
is set at too low.
Increase the volume of the unit
by VOLUME control.