User's Manual

OTHER AUDIO DEVICES

By using a home audio connection cable (not included), you can listen to an external

audio unit through this unit's speakers. Before making any connections, Turn off the

power to all equipment.

1. Plug a 3.5mm audio cable (not included) into your external music player and

connect the other end (3.5mm Jack) into the AUX IN jack at the rear of the unit.

2. Power on the unit and make sure your external music player is turned on.

3. Start music playback on your external music player.

4. Adjust VOLUME +/- buttons to control the sound level of music playback through

your unit's speaker.

5. When don't listening, press the ON/OFF button to turn the unit off and unplug the

AUX IN cable from the unit.

Remember to turn off your audio device too.

NOTE:

If you are in Radio / Bluetooth mode, when you connect an external device to the

AUX IN jack, this unit will automatically switch to AUX mode. If you remove the plug

from the AUX IN jack, the unit will resume to the mode it was in before the external

device was connected.