User's Manual
EN - 12
NOTES ON HANDLING COMPACT DISCS
To keep the disc clean, handle the disc by its edge. Do not touch the
disc surface.
Do not stick paper nor write anything on the surface.
After playing, store the disc in its case.
USB PLAY OPERATION
There are 2 USB inputs in the front panel on the unit “USB1” and “USB2”. You can connect
USB driver through either USB1 or USB2 interface. Play the USB, first press “CD-USB”
button then select USB 1 or 2 by pressing “USB/SELECT” button. The operation is the same
with the CD operation described above. For playing CD again, press “CD-USB” button on
unit or “FUNCTION” on remote control to switch to DISC mode.
BLUETOOTH OPERATION with NFC
1. Make sure that the Bluetooth device is turned on and has music ready to play.
2. On the device, turn Bluetooth on and start scanning for available Bluetooth devices.
3. Switch the unit to Bluetooth by pressing “BLUETOOTH” on the unit or on the remote
control. The display will show Bluetooth mark and “BLUE” will blink until Bluetooth device
is paired.
4. For the first time pairing, the Bluetooth device will find the unit named“ KS5500-BT”.
5. The pairing should be now complete. The blinking display “BLUE” will light on.
6. Start playing music on the Bluetooth device and the audio will be transmitted wirelessly
through the unit.
7. The and the master volume buttons on the remote control can be used to
control playback on the connected Bluetooth device also.
If your device supports NFC, simply place the device close to the mark “NFC" on the unit.
Pairing will match automatically.
NOTE:
Bluetooth range can be affected by interference and obstacles which may also cause the
wireless audio connection to break up. For best results, avoid interference and obstacles.
Connect wirelessly to the unit using Bluetooth technology and play music
through this unit.