System information

Artistic Licence Engineering Ltd. Micro-Scope 3a Manual
65 / 78
The Export Dialogue allows the user to select which of the three
types of data should be exported. The configuration data is always
exported, even when all three boxes are un-ticked.
Select the relevant types and then click the OK key.
Mic-Edit will then export the data. The export process may take up
to two minutes. When the Export process finishes, press the Micro-
Scope 3a MENU key to return to the Setup Menu. Should Micro-
Scope 3a display an error at any point, cancel the Export and start
the process again.
LIVE EDITING
Mic-Edit is able to send live DMX512 data via Micro-Scope 3a when
editing. It will only send values when they change. Therefore the
‘Live Editing Mode’ should only be used as a preview tool.
This allows the show to be programmed visually with the aid of the
actual lighting rig.
To use this feature, ensure that Micro-Scope 3a is in ‘Talk to Mic-
Edit’ mode.
The Setting dialogue allows this feature to be enabled and also the
PC com port to be selected: