System information

Artistic Licence Engineering Ltd. Micro-Scope 3a Manual
54 / 78
SETTING
LEVELS
Dragging the fader knob with the mouse sets fader levels. When the
level of a fader is set to any value above zero, tick marks are
displayed next to the fader track. The absence of tick marks
indicates that the channel is at zero.
EDITING
LEVELS
Right clicking on any fader produces a popup menu. The popup menu
provides numerous Memory editing functions as detailed in the table
below.
The fader that is right clicked is described as the selected channel
in the table below.
Entry
Name
Purpose
1
Exclude channel from this
Memory
Selected channel is set to
zero in this Memory
2
Exclude fixture from this
Memory
If the selected channel is part
of a moving lamp, all channels
in the lamp are set to zero in
this Memory.
3
Exclude INTENSITY
channels of this fixture
If the selected channel is part
of a moving lamp and it is an
intensity (dimmer) channel, all
intensity channels of the lamp
are set to zero in this
Memory.
4
Exclude POSITION
channels of this fixture
If the selected channel is part
of a moving lamp and it is a
position (pan or tilt) channel,
all position channels of the
lamp are set to zero in this
Memory.
5
Exclude COLOUR
channels of this fixture
If the selected channel is part
of a moving lamp and it is a
colour channel, all colour
channels of the lamp are set
to zero in this Memory.
6
Exclude BEAM channels
of this fixture
If the selected channel is part
of a moving lamp and it is a
beam (iris, gobo, prism)
channel, all beam channels of
the lamp are set to zero in
this Memory.