System information

Artistic Licence Engineering Ltd. Micro-Scope 3a Manual
31 / 78
@
@
@
@
@
@
TRANSMIT
MEMORY
The TRANSMIT MEMORY
menu allows any one of the
twelve Memories to be
transmitted to the
dimmers and edited. Each Memory contains individual level settings
for all 512 channels and is held in non-volatile Memory. The Memory
to be transmitted and edited is selected by the UP and DOWN keys
when the menu display is active. Press the MENU key to enter edit
mode.
The following keys are active:
 LEFT Decrement the dimmer channel
 RIGHT Increment the dimmer channel
 UP Increment the dimmer level
 DOWN Decrement the dimmer level
 TOGGLE Invert dimmer level
The DMX512 output continues when Micro-Scope is in Receive
mode.
The SNAPSHOT and FILL menus are alternative methods of
programming the Memories.
Two separate modes of display are available within this function.
The display mode is selected from within Setup Menu 5.
NUMERIC
DISPLAY
In Numeric Display mode, the
display shows the current
dimmer channel, followed by
its level in percent, binary,
hexadecimal and decimal. This feature also doubles as a decimal,
hexadecimal, binary converter.
LAMP DISPLAY
In Lamp Display mode, the
display shows the current
dimmer channel, followed by
its function and decimal level.
The lower line of the display shows the moving lamp of which this
channel forms a part.
The patch entered in Mic-Edit defines the moving lamp name and
channel function.