Instruction manual

Artistic Licence
46
Multichrome D1
(F3) LED - Pixel Price £515
Features
 9 VDC Power supply for
Multichrome Flex, Web and Tube
 Wall, ceiling or truss mount
 DMX512-A / RDM interface
 RDM Draft V1.0 capable
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 100W
 Input Voltage: 90-264VAC (47-
440Hz)
 Current - Inrush: 25A-115V /
50A-230V
 Output Voltage: 9VDC, 10A
 Duty Cycle: 80%
 Environment: Max ambient
Temperature +5C to +30C
 Environment: Relative Humidity
15% - 85% non condensing
 Dims: 100 mm (w) x 110 mm (d)
 Height: 218 mm or 303 mm (inc
flange or flange & G-Clamp)
 Output Connection: Trident
Ringlock Socket (24 way)
 Mains Connection: IEC
 DMX Connections: 5 pin XLR
Multichrome D1 is an integrated power controller for Multichrome Flex, Web
and Tube
Multichrome D1 combines the functions of a power supply and an isolated
DMX512-A / RDM interface. The product can be wall, ceiling or truss mounted.
D1 uses RDM for configuration. If your chosen control system does not yet
support RDM, Jump-Start can be used to set the start address and all other
RDM parameters. The truss mount G-Clamp is available from Doughty
Engineering order code SP2703.
Multichrome D1 drives: 10 x Multichrome Flex 16/250 or 5 x Multichrome Flex
32/125 or 2.5 x Multichrome Web Hi-Res or 10 x Multichrome Web Med-Res
or 10 x Multichrome Tube
Multichrome E1
(F3) LED - Pixel Price £1715
Features
 9 VDC Power supply for
Multichrome Flex, Web and Tube
 Wall, ceiling or truss mount
 Single Art-Net connection
 Virtual RDM V1.0 (E1.20 - 2006
ESTA Standard)
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 200W
 Input Voltage: 90-264VAC (47 -
440Hz)
 Current - Inrush: 50A-115V /
100A-230V
 Output Voltage: 9VDC, 2 x 10A
 Duty Cycle: 80%
 Environment: Max ambient
Temperature +5C to +30C
 Environment: Relative Humidity
15% - 85% non condensing
 Dims 186 mm (w) x 110mm (d)
 Height: 218 mm or 303 mm (inc
flange or flange & G-Clamp)
 Output Connection: 2 x Trident
Ringlock Socket (24 way)
 Mains Connection: IEC
 Control Connection: 1 x RJ45
(Ethercon)
Multichrome E1 is an integrated power controller for Multichrome Flex, Web
and Tube. It will find primary application with Multichrome Web due to the
robust design and truss mounting capability.
Multichrome E1 combines the functions of a power supply and an isolated Art-
Net Ethernet interface.
The product can be wall, ceiling or truss mounted. The truss mount G-Clamp
is available from Doughty Engineering order code SP2703.
Multichrome E1 drives: 20 x Multichrome Flex 16/250 or 10 x Multichrome
Flex 32/125 or 5 x Multichrome Web Hi-Res or 20 x Multichrome Web Med-
Res or 20 x Multichrome Tube