Instruction manual

Artistic Licence
45
Multichrome Flex Medium Res
(F3) LED - Pixel Price £256
Features
 Long Lamp Life
 Low Beam Temperature
 Low Power Consumption
 16 Million Colours
 High Colour Purity
 Excellent white tracking
 Optimised for designer friendly
colours
 Variable Colour Temperature
 Individual control by Multichrome
E1, E2 & D1
 Interior or Exterior
Specification
 Light output: 2100 mCd
 Beam Angle: 120 Degrees
 Pixel Pitch: 250mm
 16 pixels
 Listing: CE FCC
 Control: Proprietary
 IP Rating: IP67 (all connectors
mated to IP connectors)
 Min bend radius: 50mm
 Power: 9W
 Voltage: 9V
 Current: 1A
 Data Rate: 10MBs
 Lens Diameter: 17mm
 Body Diameter: 38mm
 Lens Depth: 6mm
 Total Depth: 21mm
 Connection: Switchcraft 4 pin
miniature
 Operating Temperature: 0C to
+40C
 Flex can be operated to -20C
when static
 Humidity: 90% non condensing
Multichrome-Flex is the next generation of the highly successful Pixi-Flex with
the added benefit of IP67 rating for exterior use. Rugged, durable and weather
resistant, each pixel is encapsulated in a plastic housing so its creative
capabilities can now be applied to exterior events, concerts, and even
architectural applications.
Multichrome-Flex is a string of miniature self contained LED colour pixels
which uses the latest 'point source' LED technology to provide three primary
coloured LEDs in a single package. It is constructed as multiple pixels
moulded onto a cable. Each pixel measures just 38mm in diameter with a
17mm lens. The red, green and blue light emitted from the LED is effectively a
single point of coloured light. This feature leads to a superb colour mixture
with none of the chromatic aberration familiar from earlier technologies.
Multichrome-Flex is a perfect solution for colour wall and video wall
applications. Its small size, low mass and low heat allow it to be push fitted
into almost any structure including sets, walls and other architectural features.
Combined with Colour-Tramp, Multichrome-Flex can display real time video in
combination with stunning visual effects.
Multichrome-Flex is available in two formats:
Multichrome-Flex 16/250 (16 pixels on a nominal 250mm pitch)
Multichrome-Flex 32/125 (32 pixels on a nominal 125mm pitch)
Custom options are available; coloured cables, pixel pitch and number of
pixels (subject to minimum order quantity)
Multichrome Flex is a novel design. It receives power and data via a miniature
4 pin cable. Each pixel is lightweight, allowing it to push fit into almost any
structure. A total of 32 Pixels can be driven from a single cable. The
controllers, Multichrome D1, E1 & E2 can control 5 or 10 circuits, 160 or 320
pixels in total. Each pixel can be either individually addressed or controlled as
a group.
Multichrome Flex is a perfect solution for colour wall and video wall
applications. Its small size, low mass and low heat allow it to be mounted into
sets, walls and other architectural features. Combined with Colour-Tramp,
Pixi-Flex can display real time video in combination with stunning visual
effects.
Multichrome Flex contains a custom silicon chip that receives high speed data
from the controller. This allows each Pixel to be individually controlled and at
the high speed needed for video display.
Three options exist for power and control: Multichrome D1 is the DMX512
power controller for Multichrome Flex. It is a mains powered controller that can
be wall or truss mounted. Multichrome E1 & E2 are the Art-Net power
controllers for Multichrome -Flex. The E1 is a mains powered controller that
can be wall or truss mounted while the E2 is DIN Rail mounted and requires
an external PSU.
Multichrome Flex High Res
Price £512