Instruction manual

Artistic Licence
43
Candle-Power CP12-0
(F2) LED - Constant Current Price £285
Features
 DMX512 / RDM
 Modules must be ordered
separately
 DIN Rail or Surface Mounting
 15V to 48V with a variable number
of LEDs between 1 & 12 per
channel
 Automatic compensation for cable
voltage drop
 High efficiency and low heat
generation
 Smooth dimming curve with good
low end control
 Modular solution
 DMX512 and RDM interface as
standard with full feedback of lamp
sensors such as temperature and
hours
 Short proof and self protecting
outputs
Specification
 Output: 12 Channel AFM
Modulation
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 144W
 Input Voltage: 15-48 VDC
 Output Voltage: as input
 Output Current: N/A
 Duty Cycle: 80% @25C
 Width: 159 mm
 Height: 95 mm
 Depth: 73.5 mm
 Connection: Screw terminal
Candle-Power is an LED dimmer designed to control high power LED devices
such as those available from Lumileds and Cree.
Candle-Power is based on a modulation technique, invented by Artistic
Licence, called Asymmetric Frequency Modulation AFM. AFM is an evolution
of the frequency modulation technique pioneered by Artistic Licence and
published to the public domain in 2002.
The product is a DIN-Rail mounted enclosure providing up to 12 channels or
four RGB triplets. It can operate from 15V to 48V. Each of the 12 outputs can
drive one to twelve high power LEDs in series. This provides a total load
capability of 144 LEDs.
Candle-Power 12 is available in a number of variants which are described by
the part number: CP12-xx-yyy mA. (xx is the number of channels. yyy is the
current rating of the module). 1W LEDs are normally driven at 350mA. 3W
LEDs are normally driven at 700mA.
Candle-Power CP12-0 No modules fitted, 4 Free Slots
Candle-Power CP12-3-350 3 Channel, 1 RGB, 1W LEDs, 3 Free Slots
Candle-Power CP12-6-350 6 Channel, 2 RGB, 1W LEDs, 2 Free Slots
Candle-Power CP12-9-350 9 Channel, 3 RGB, 1W LEDs, 1 Free Slots
Candle-Power CP12-12-350 12 Channel, 4 RGB, 1W LEDs, 0 Free Slots
Candle-Power CPM-100 3 Channel 100mA Module
Candle-Power CPM-350 3 Channel 350mA Module
Candle-Power CPM-500 3 Channel 500mA Module
Candle-Power CPM-550 3 Channel 550mA Module
Candle-Power CPM-700 3 Channel 700mA Module
{(Jump-Start)} can be used to set the start address.
Candle-Power CP12-3-350
Price £330
Candle-Power CP12-3-700
Price £345
Candle-Power CP12-6-350
Price £375
Candle-Power CP12-6-700
Price £405
Candle-Power CP12-9-350
Price £425
Candle-Power CP12-9-700
Price £445
Candle-Power CP12-12-350
Price £475
Candle-Power CP12-12-700
Price £505