Instruction manual

Artistic Licence
40
Henry
(E) Interface Products Price £35
Features
 Screened RJ45
 ESTA standard wiring
 Neutrik plastic XLR connector
(Neutrik A series)
 Henry - Male XLR
 Henrietta - Female XLR
Specification
 Height: 28mm
 Width: 26mm
 Depth: 43mm
 External Connections: 5 pin XLR
 Internal Connections: Screened
RJ45
Henry and Henrietta are RJ45 to 5 pin XLR adapters. The products are
intended for assembly into patch bays and wall panels, allowing CAT5 cabling
to be used for DMX512.
Panel mounting is by the XLR screw holes. Minimum pitch in a panel is 29mm.
Allow 5mm below module to clear pcb from base panel.
Henrietta
(E) Interface Products Price £35
Features
 Screened RJ45
 ESTA standard wiring
 Neutrik plastic XLR connector
(Neutrik A series)
Specification
 Height: 28mm
 Width: 26mm
 Depth: 45mm (excluding ejector)
 External Connections: Female 5
pin XLR
 Internal Connections: Screened
RJ45
Henrietta is an RJ45 to female 5 pin XLR adapter. The product is intended for
assembly into patch bays and wall panels, allowing CAT5 cabling to be used
for DMX512.
Panel mounting is by the XLR screw holes. Minimum pitch in a panel is 29mm.
Allow 5mm below module to clear pcb from base panel.
Rail-Patch XLR5F
(E) Interface Products Price £32
Features
 Rail-Patch XLR5F - Female XLR
 Rail-Patch XLR5M - Male XLR
Specification
 IP Rating: Indoor use
 Height: 92mm
 Width: 33.4mm
 Input Connector: 5pin Female
XLR
 Output Connector: 3pin Screw
Terminal
Rail-Patch XLR is a din rail mounted panel for the DIN Rail range.
It provides connection between an XLR 5 pin connector and screw terminals
Rail-Patch XLR5M
Price £32