Instruction manual

Artistic Licence
39
Features
 DIN Rail Case
 8 Channel DMX Trigger (0 or 255
value)
 Inputs are fully Opto-Isolated
 Voltage Output for easy
Connection
Specification
 Input Voltage: 9 to 24VDC
 Power: 10W
 Protection Internal: Internal
Resettable Fuse
 DMX Input & DMX Loop
 Rail-Contact Cascade option
 Protocol: DMX512-A
 Duty Cycle: 100%
 Listing: CE FCC
 Height: 90mm
 Width: 88mm
 Depth: 58mm
Rail-Contact monitors the state of 8 contact closures and translates this into a
value on DMX channels 1 to 8. When a contact closure is active the
corresponding value is DMX is 255.
If more than 8 channels are required then two Rail-Contacts can be linked
together to form a 16 channel device. The DMX output from the first unit is
connected to the input to the second unit. The first 8 channels are then re-
patched to channels 9 to 16.
Rail-Sequence
(E) Interface Products Price £285
Features
 Six mains relays
 DIN Rail Mount
 Surface Mount
 1 second interval
 6 second boot up time
 Automatic Operation
Specification
 Input Voltage: 9-24VDC
 Power: 10W
 Switch Voltage: 230VAC max
 Switch Current: 8A - Non-
Inductive loads
 Duty Cycle: 80%
 Listing: CE FCC
 IP Rating: Indoor use
 Height: 90mm
 Width: 88mm
 Depth: 58mm
Rail-Sequence is an automatic Timer Delayed Power Sequencer. It turns on
each of the six relays in turn with a 1 second interval.
It has been designed to work with equipment that contains Switch Mode PSUs
that have a high In-Rush Current. This type of equipment will trip circuit
breakers on turn on that can cause damage to the equipment itself and others
on that same circuit breaker. Rail-Sequence will stagger the relays turning on
by 1 second interval.
Sequence-Filter is a DIN Rail mounted current inrush limiter that will provide
protection for the internal filter on Rail-Sequence. This product will further limit
the 'turn on' current.
Sequence-Filter
Price £32
Rail-Road
(E) Interface Products Price £145
Features
 DIN Rail mounting for 19" Rack
Specification
 Space for;
 5 Standard products (Rail-
Split RDM)
 2 Wide products (CP12)
 3 Art-Net Standard products
(Art-Lynx)
 2 Art-Net Wide Products
(Two-Play)
19" Rack adapter for DIN Rail products. Please note that pictured DIN Rail
items are not included with this product.