Instruction manual

Artistic Licence
38
Rail-Tran
(E) Interface Products Price £265
Features
 Six Darlington drive outputs
 DMX512
 Remote Device Management
 DIN Rail mount
 Surface mount
Specification
 Input Voltage: 9 to 48VDC
 Power: 7.5W
 Internal Resettable Fuse
 Output Voltage: 5 - 50VDC max
 Output Current per Channel:
120mA
 Output Current Total: 750mA
 Input Protocols: DMX512,
DMX512(1990), DMX512-A
 RDM V1.0 (E1.20 - 2006 ESTA
Standard)
 Duty Cycle: 100%
 Listing: CE FCC
 IP Rating: Indoor use
 Dims:90mm (h) x 88mm (w) x
58mm (d)
Rail-Tran provides six darlington transistor outputs capable of operation to
50V DC at 450mA. Rail-Tran is housed in a high impact DIN-Rail mounting
case with DMX512 and RDM support.
Rail-Tran can be used for a wide range of interface tasks including remote
control of contactors, solenoid and motor drive and general animatronics.
LMX6
(E) Interface Products Price £825
Features
 24 VDC Power & Data supply for
CKs Chromasic Pixel Range DIN
Rail Mounted
 Two DMX Inputs
 300 pixel control
 Push Fit Screw Terminal for
Outputs
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: Requires upto 250W
 In / Out Voltage: 24VDC, 2 x
12A (max)
 Duty Cycle: 80%
 Operating Temp: +5C to +30C
 Storage Temp: -10C to +40C
 Operating Relative Humidity
(max): 15%-85% non-
condensing
 Dimensions: 203mm (W) x
82mm (H) x 50mm (D)
 DMX: Screw Terminal
 Power Input: Push Fit Screw
Terminals
 Output Connections: Push Fit
Screw Terminals
LMX6 provides six data and power outputs for the Color Kinetics Chromasic
range. Each output can control up to 50 pixels. LMX6 can be used instead of
sPDS-60ca and others similar controllers.
Two DMX inputs are used to control 3 outputs each using the channels 1 to
450. LMX6 requires a 24V input capable of driving the number of pixels
attached to the outputs.
The product is DIN Rail mounted making it easy to install in cabinets. The
outputs use a three pin connector that provides +24V DC, GND and data to
the connected pixel product. All connectors are supplied.
Common-Sense
(E) Interface Products Price £955
Features
 16 Opto-isolated inputs
 64 Matrix keyboard inputs
 2 Analogue 0-5V inputs
 DMX512 input /output
 RS232 input / output
 RS485 input / output
 MIDI input / output
 MIDI timecode, show control
 Infrared handset input
 Real time clock
 Configured by PC
 Compatible with DMX512,
DMX512 (1990), DMX512-A
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 300mW
 External PSU Voltage: 90-
250VAC
 Input Voltage: 9VDC
 Height: 45 mm
 Width: 320 mm
 Depth: 98 mm
 Signal Connection: XLR5
 Mains Connection: IEC
 Rear Mounting: Single M4 x
20mm
 Supplied with universal power
supply and manual
Common-Sense is the ultimate solution to equipment interfacing and
triggering. Common-Sense receives a multitude of input signals that can be
converted to numerous serial outputs.
Common-Sense is configured using the PC software: Sense-Edit.
Sense-Edit can also be used on Mac computers by running the Mac Windows
Emulator programme.
Sense-Edit allows all input to output relationships to be programmed using a
sophisticated visual interface. The user has the option to choose from
standard templates for triggering products such as Show-Control and Four-
Play or enter all parameters. When the latter option is selected, the user has
control over advanced features such as baud rate and data format.
Rail-Contact
(E) Interface Products Price £255