Instruction manual

Artistic Licence
34
Dali-Scope
(E) Interface Products Price £285
Features
 Set the fixture address including
group assignments
 Auto-patch fixture addresses
 Test the fixture
 Transmit single levels, group and
scene
 Walk test; cycle through channels
groups and scenes
 Read all current DALI levels for
channels, groups and scenes
 Read latest DALI levels for
channels, groups and scenes
 Programme scenes
 Read back configuration info
 Read back status information such
as lamp hours + lamp voltage.
 Test the DALI bus power supply.
 Test lead included
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 2 x AA Battery
 Height: 95 mm
 Width: 65 mm
 Depth: 28 mm
 Signal Connection: RCA Jack
(phono)
 Phono to croc-clip lead included
Dali-Scope is a hand-held tool for testing, programming and configuring DALI
(Digital Addressable Lighting Interface) devices. Dali-Scope is the first hand-
held tool specifically designed for DALI.
The product display uses high brightness LEDs making it easy to use in low
light conditions. The moisture proof keypad uses single function keys for ease
of operation. Dali-Scope is powered by two AA batteries and offers over 12
hours continuous operation. The product is compatible with rechargeable
batteries and provides a programmable power off timer to further extend
battery life.
What makes Dali-Scope Innovative? Industry first hand-held tool for DALI.
Ability to test the bus power supply. Low cost allows both individual and
company ownership. Allows commissioning of DALI fixtures without PC.
Simplifies re-configuration after fixture changes or additions.
DALI-USB
(E) Interface Products Price £315
Features
 Monitor DALI traffic
 Configure DALI ballasts / fixtures
 Transmit DALI Commands
Specification
 Listing: CE, RoHS
 IP Rating: Indoor Use
 Power: From USB Interface
 Height: 29.5mm
 Width: 51mm
 Length: 101.5mm
 Connections: USB lead included
 DALI connections via screw
terminals
A USB tool that is used for monitoring and configuration of a DALI circuit on a
Windows PC platform.
Rail-DMX-DSI
(E) Interface Products Price £375
Features
 DMX512 to DSI conversion
 Configurable Start Addresses
 'Dimming Curve' Translation
 Four DSI Circuits
 DIN Rail mount
 Surface mount
Specification
 Input Voltage: 9-24VDC
 Power: 10W
 Protection: Internal 500mA
electronic fuse
 Protocols: DMX512-A, DSI
 RDM V1.0 (E1.20 - 2006 ESTA
Standard)
 Duty Cycle: 80%
 Listing: CE FCC
 IP Rating: Indoor use
 Height: 90mm
 Width: 88mm
 Depth: 58mm
Based on the product Rail-DMX-DALI, Rail-DMX-DSI converts DMX to four
DSI outputs. Each DSI output uses one DMX channel as DSI is a broadcast
protocol.
The start address for each conversion channel can be set independently
allowing custom patching. As with Rail-DMX-DALI there is a 'dimmer curve
translation' feature built in that converts a DMX curve in a DSI dimming curve.
This product requires a 9V to 24V PSU. The DSI circuit requires a DALI/DSI
Bus PSU. An example of this is Rail-PSU-D4.