Instruction manual

Artistic Licence
24
Data-Lynx I/P
(C) Ethernet and Art-Net Price £1775
Features
 Modular control & distribution
 Internal Ethernet switch
 2 RJ45 10/100BaseT ports
(Ethercons)
 12 DMX512 inputs
 DHCP supported
 Universal mains input
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 30W
 Input Voltage: 90-250 VAC
 Height: 1RU, Depth: 265mm
 Width: 19" Rack
 Art-Net Connections: RJ45 x 2
(Ethercon)
 Mains Connection: IEC
 Isolation Ethernet port: Isolated
 Isolation DMX Inputs: Ground
Referenced
 DMX512 or DMX512-A
compatible
Data-Lynx I/P is a 1RU 19" rack mounting DMX512 to Art-Net converter. The
product is a no frills solution that gives the customer maximum packing density
and the lowest cost whilst maintaining the customary Artistic Licence quality.
The standard product provides 12 DMX512 inputs, using front mounted
Neutrik XLR 5 pin connectors. Network connectivity is achieved using either
the front or rear mounted Ethercon RJ45 connector.
A single front panel control sets the 'Box Address' for the simplest possible
configuration. As with all Artistic Licence Art-Net products, DMX-Workshop
can be used for detailed configuration such as individual universe addressing.
Configuration can also be achieved using the internal web-server.
The product is powered via a universal mains IEC connector located on the
rear of the unit.
Data-Lynx IO/P
(C) Ethernet and Art-Net Price £1875
Features
 Modular control & distribution
 Internal Ethernet switch
 2 RJ45 10/100BaseT ports
(Ethercons)
 6 DMX512 inputs
 6 DMX512 / RDM outputs
 Universal mains input
 RDM V1.0 (E1.20 - 2006 ESTA
Standard)
 DHCP
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 30W
 Input Voltage: 90-250VAC
 Height: 1RU, Depth: 265mm
 Width: 19" Rack
 Ethernet Connections: RJ45 x 2
(Ethercon)
 Mains Connection: IEC
 Ethernet ports isolated to 1kV
 DMX Outputs: Ground
Referenced
 DMX Inputs: Ground Referenced
 DMX512 or DMX512-A
compatible
 Art-Net or sACN
Data-Lynx IO/P is a 1RU 19" rack mounting ethernet (Art-Net or sACN) to
DMX512 and DMX512 to Art-Net converter. The product is a no frills solution
that gives the customer maximum packing density and the lowest cost whilst
maintaining the customary Artistic Licence quality.
The standard product provides 6 DMX512 inputs along with 6 DMX512/RDM
outputs, using front mounted Neutrik XLR 5 pin connectors. Network
connectivity is achieved using either the front or rear mounted Ethercon RJ45
connector.
A single front panel control sets the 'Box Address' for the simplest possible
configuration. As with all Artistic Licence Art-Net products, DMX-Workshop
can be used for detailed configuration such as individual universe addressing.
Configuration can also be achieved using the internal web-server.
The Data-Lynx outputs are fully RDM (Remote Device Management)
compatible.
The product is powered via a universal mains IEC connector located on the
rear of the unit.
Data-Lynx O/P
(C) Ethernet and Art-Net Price £1775
Features
 Modular control & distribution
 Internal Ethernet switch
 2 RJ45 10/100BaseT ports
(Ethercons)
 Art-Net 3 & sACN support
 12 DMX512 / RDM outputs
 Universal mains input
 RDM V1.0 (E1.20 - 2006 ESTA
Standard)
 DHCP
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 30W
 Input Voltage: 90-250VAC
 Height: 1RU, Depth: 265mm
 Width: 19" Rack
 Art-Net Connections: RJ45 x 2
(Ethercon)
 Mains Connection: IEC
 Isolation Ethernet port: Isolated
 Isolation DMX Outputs: Ground
Referenced
 DMX512 or DMX512-A
compatible
Data-Lynx O/P is a 1RU 19" rack mounting Art-Net to DMX512 and RDM (or
sACN to DMX512) converter. The product is a no-frills solution that gives the
customer maximum packing density and the lowest cost while maintaining the
customary Artistic Licence quality.
The standard product provides 12 DMX512/RDM outputs, using front mounted
Neutrik XLR 5 pin connectors. Network connectivity is achieved using either
the front or rear mounted Ethercon RJ45 connector
A single front panel control sets the 'Box Address' for the simplest possible
configuration. As with all Artistic Licence Art-Net products, DMX-Workshop
can be used for detailed configuration such as individual universe addressing.
Configuration can also be achieved using the internal web-server.
The Data-Lynx outputs are fully RDM (Remote Device Management)
compatible. The product is powered via a universal mains IEC connector
located on the rear of the unit.