Instruction manual

Artistic Licence
23
Cata-Lynx O/P
(C) Ethernet and Art-Net Price £595
Features
 DMX routing by Ethernet
 Two independent DMX512 outputs
 Each output has two separate
DMX ports
 10/100BaseT Ethernet Port
 Data activity indicators
 Compatible with Art-Net
 Compatible with sACN
 Compatible with DMX512-A
 Compatible with RDM V1.0 (E1.20
- 2006 ESTA Standard)
 DHCP supported
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 30W
 Input Voltage: 90-250VAC
 Height: 1RU, Depth: 257mm
 Width: 19" Rack
 DMX Control Connections: XLR5
 Ethernet Connection: Ethercon
 Mains Connection: IEC
 Ethernet port: Isolated to 1kV
 DMX outputs: Ground
Referenced
Cata-Lynx O/P is a rack mounted ethernet (Art-Net or sACN) to two universe
DMX512 converter.
Cata-Lynx O/P is designed with all data cable entries at the front of the
product, including two DMX512 outputs via 5-pin XLR and a latching network
connection via Ethercon. The universal mains input connector is located on
the rear of the unit.
Configuration is as simple as selecting the required universe on the front panel
wheel selections. Alternatively, the product can be remotely configured using
the free of charge DMX-Workshop software via the network or the internal
web-server.
Cata-Lynx O/P is fully RDM (Remote Device Management) compatible.
Cata-Lynx I/P
(C) Ethernet and Art-Net Price £595
Features
 DMX routing by Ethernet
 Two independent DMX512 inputs
 Each input has an XLR loop-
through connection
 10/100BaseT Ethernet Port
 Data activity indicators
 Compatible with Art-Net
 Compatible with DMX512-A
 DHCP supported
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 100W
 Input Voltage: 90-250VAC
 Height: 1RU, Depth: 257mm
 Width: 19" Rack
 DMX Control Connections: XLR5
 Art-Net Connections: Ethercon
 Mains Connection: IEC
 Isolation Ethernet port: Isolated
 Isolation Power input: Isolated
 Isolation DMX Inputs: Ground
Referenced
Cata-Lynx I/P is a rack-mounted, two universe DMX512 to Art-Net Ethernet
converter.
It is aimed at the light and video convergence market for use with media
servers. Cata-Lynx I/P provides a cost effective and elegant method to
remotely control any Art-Net compliant media server such as the High End
Systems Catalyst or Scene Change Hippotizer. It can also be used with Art-
Net compliant visualisation software such as Cast Lighting’s WYSIWYG and
Design & Drafting’s LD Assistant.
Configuration can be achieved using the front panel wheels, DMX-Workshop
or the internal web-server.
Ether-Lynx II
(C) Ethernet and Art-Net Price £1275
Features
 DMX routing by Ethernet
 Two independently Isolated
DMX512 inputs
 Four DMX512 outputs
 2 RJ45 10/100BaseT ports
(Ethercons)
 Data activity indicators
 Compatible with Art-Net
 Compatible with sACN
 Compatible with DMX512-A
 Compatible with RDM V1.0 (E1.20
- 2006 ESTA Standard)
 DHCP supported
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 30W
 Input Voltage: 90-250 VAC
 Height: 1RU, Depth: 257mm
 Width: 19" Rack
 DMX Control Connections: XLR5
 Art-Net Connections: Ethercon
 Mains Connection: IEC
 Isolation Ethernet port: Isolated
 Isolation Power input: Isolated
 Isolation DMX Inputs: Isolated
 Isolation DMX Outputs: Ground
Referenced
Ether-Lynx II is a 1RU 19" rack mounted ethernet (Art-Net or sACN) to
DMX512 and DMX512 to Art-Net converter. It provides a true Plug and Play
solution for DMX512 cabling and distribution in all applications needing fast
and robust transmission of lighting control data. The four DMX512 outputs are
fully bi-directional allowing DMX512 data to be returned to the lighting console
using the ESTA RDM standard. The two DMX512 inputs are fully optically
isolated. Ether-Lynx is fully DMX512-A compliant. Network connectivity is
achieved using either the front or rear mounted Ethercon RJ45 connector.