Instruction manual

Artistic Licence
22
Net-Lynx O/P
(C) Ethernet and Art-Net Price £530
Features
 DMX routing by Ethernet
 Compatible with Art-Net and
sACN
 Two DMX512 outputs
 10BaseT Ethernet Port
 Compatible with DMX512-A
 RDM V1.0 (E1.20 - 2006 ESTA
Standard)
 DHCP supported
 Power indicator
 Data activity indicators
 Truss Mount Adapter available
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 2W
 Input Voltage: 9-48VDC
 Current: 35mA @ 48VDC
 Height: 115mm
 Width: 195mm
 Depth: 55mm
 DMX Output Connections: XLR5
 Network Connections: XLR-
RJ45
 Power Connection: XLR4
 Isolation Ethernet port: Total
Isolation
 Isolation Power input: Total
Isolation
 Isolation DMX Output:
A/B:Common Ground
Referenced
Net-Lynx O/P is a desktop ethernet to DMX512 converter. It converts Art-Net
ethernet data into two universes of DMX512/RDM, or sACN into two universes
of DMX512.
Net-Lynx O/P is housed in a small, robust extruded case. The ethernet
connection is made via a latching Neutrik XLR-RJ45 connector. This
connector also accepts standard RJ45s. The power input can be either from
the ethernet cable using the IEEE 802.3 standard, or from an external power
supply.
The front panel provides two DMX512-A outlets. Configuration is simplicity
itself - the three rotary dials are used to select the required DMX512 universe.
Alternatively, the product can be remotely configured.
This product can be fitted with a Truss Mount Adapter Truss-Ear. Net-Lynx
O/P can be software upgraded via the network connection.
Net-Lynx I/P
(C) Ethernet and Art-Net Price £530
Features
 DMX routing by Ethernet
 Two DMX512 inputs
 10BaseT Ethernet Port
 Compatible with DMX512,
DMX512(1990), DMX512-A
 Power indicator
 Data activity indicators
 Art-Net Compatible
 DHCP supported
 Truss Mount Adapter available
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 2W
 Input Voltage: 9-48VDC
 Height: 115mm
 Width: 195mm
 Depth: 55mm
 DMX Input Connections: XLR5
 Network Connections: XLR-
RJ45
 Power Connection: XLR4
 Isolation Ethernet port: Isolated
 Isolation Power input: Isolated
 Isolation DMX A/B:Non-Isolated
Net-Lynx I/P is a desktop DMX512 to Ethernet converter. It converts two
universes of DMX512 into Art-Net Ethernet data.
Net-Lynx I/P is housed in a small, robust extruded case. The Ethernet
connection is made via a latching Neutrik XLR-RJ45 connector. This
connector also accepts standard RJ45's.
The power input can be either from the Ethernet cable using the IEEE 802.3
standard, or from an external power supply. The front panel provides two
DMX512-A inputs. Configuration is simplicity itself. The three rotary dials are
used to select the required DMX512 universe.
Net-Lynx I/P can be software upgraded via the network connection. This
product can be fitted with a Truss Mount Adapter Truss-Ear.
Truss-Ears
Price £49