Instruction manual

Artistic Licence
21
Down-Lynx UK
(C) Ethernet and Art-Net Price £415
Features
 DMX routing by Ethernet
 Art-Net 3 and sACN compatible
 Two DMX512 outputs
 10BaseT Ethernet Port
 DHCP supported
 Power indicator
 Data activity indicators
 Compatible with DMX512-A
 RDM V1.0 (E1.20 - 2006 ESTA
Standard)
 Back Box supplied
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 2W
 Input Voltage: 9-48VDC
 Height: 85mm
 Width: 146mm
 Depth: 39mm
 DMX Output Connections: XLR5
 Network Connections: RJ45
 Power Connection: RJ45 or IDC
 Isolation Ethernet port: Isolated
 Isolation Power input: Isolated
 Isolation DMX A/B: Ground
Referenced
Down-Lynx converts Ethernet data into two universes of DMX512.
Down-Lynx is housed in a standard 'Two-Gang' panel that is compatible with
all standard UK conduit and surface mount boxes; back box supplied.
The Ethernet connection is made to the rear of the panel via an RJ45
connector. Power can be connected by a separate cable, or via the Ethernet
cable using the IEEE 802.3 standard.
The front panel provides two DMX512-A outlets which support RDM.
Configuration is simplicity itself. The three rotary dials are used to select the
required DMX512 universe.
Down-Lynx can be software upgraded via the network connection.
Up-Lynx UK
(C) Ethernet and Art-Net Price £435
Features
 DMX routing by Ethernet
 Connect up to 256 DMX Universes
to one network
 Two DMX512 inputs
 10BaseT Ethernet Port
 Compatible with DMX512-A
 Power indicator
 Data activity indicators
 Art-Net Compatible
 Back Box supplied
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 2W
 Input Voltage: 9-48VDC
 Height: 85mm
 Width: 146mm
 Depth: 39mm
 DMX Input Connections: XLR5
 Network Connections: RJ45
 Power Connection: RJ45 or IDC
 Isolation Ethernet port: Isolated
 Isolation Power input: Isolated
 Isolation DMX A/B: Non-Isolated
Up-Lynx is part of the growing range of Art-Net compliant Ethernet products.
Up-Lynx converts two universes of DMX512 into Art-Net Ethernet data.
Up-Lynx is housed in a standard 'Two-Gang' panel that is compatible with all
standard UK conduit and surface mount boxes, back box supplied.
The Ethernet connection is made to the rear of the panel via an RJ45
connector. Power can be connected by a separate cable, or via the Ethernet
cable using the IEEE 802.3 standard. A screw terminal connection for both
power and data is available to special order.
The front panel provides two DMX512-A inputs. Configuration is simplicity
itself. The three rotary dials are used to select the required DMX512 universe.
Up-Lynx can be software upgraded via the network connection.