Instruction manual

Artistic Licence
18
Mic-Edit
(B) Handheld Test & Control Price £125
Features
 Edit up to 100 lamp personalities
 200 pre-programmed personalities
 Edit all 12 Memories
 Generate custom test patterns
 Setup parameters such as Start
Code, Power Save
 Customise power up screen
 Customise menus
 Customise bar graph fonts
 Live DMX512 control for editing
personalities
Specification
 Software on CD
 Serial link cable
 Instruction manual is supplied
with Micro-Scope 3a
Mic-Edit is an off-line editor for Micro-Scope 3a. It runs under Windows
95/98/ME/NT/2K/XP/Vista(32) and allows all configuration, lamp libraries and
memories to be edited, stored on disc and then downloaded to Micro-Scope
3a via the serial cable.
Mic-Edit ships with a library of lamp personalities for over 200 lamps. The
package includes the serial link interface which allows Micro-Scope 3a to
communicate with a PC via the RS232 port. A USB adapter is also included.
Mic-Edit can also be used on Mac computers by running the Mac Windows
Emulator programme.
Line-Light 5
(B) Handheld Test & Control Price £26
Features
 Compatible with DMX512,
DMX512 (1990), DMX512-A
Specification
 5 pin male XLR
 Integral three colour LED
 Instructions printed on product
The Line-Light is a simple DMX512 and CMX tester. The product is built into a
standard XLR connector. It can be used to identify active DMX512, pins 2 & 3
miswired and data activity. A three pin version is also available.
Line-Light 3
Price £26
MIDI-Scope
(B) Handheld Test & Control Price £595
Features
 Display real time data
 Capture & Review
 Programmable capture trigger
 Scope trigger output
 Continous, burst, character and
triggered transmission
 Retransmit MIDI
 RS485 boost output
 Cable Test
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 300mW
 Charger Voltage: 90-250VAC
 Input Voltage: 9VDC
 Dim: 45 x 125 x 98 mm
 Signal Connection: DIN5
 Power Connection: DC Jack
 Rear Mounting: Single M4 x
20mm
MIDI-Scope is a small hand-held MIDI receiver and transmitter. It is invaluable
for debugging MIDI control problems and testing MIDI equipment. It is
powered by an internal rechargeable battery with a normal life of some 25
hours.
When used as a receiver the MIDI-Scope's LCD screen can display data in
either hexadecimal or as command icons. The received data can be stored in
a buffer for detailed review or re-transmission. The receive buffer is controlled
by a programmable trigger, allowing the user to capture specific blocks of
data.
The transmitter may be used to regenerate received data or to transmit user
programmable MIDI messages. Transmitter events can be initiated by
received data. The receive and transmit sections operate simultaneously,
allowing MIDI-Scope to test MIDI-Merge and MIDI-Filter units.
MIDI-Scope also provides a high power RS485 MIDI Through output which
can be used to boost MIDI data over very long cable runs.
DMX-Break
Price £165